dmesg - Intel Broadwell-U
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.0-9-generic (buildd@phianna) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu1) ) #10-Ubuntu SMP Mon Jan 12 21:41:54 UTC 2015 (Ubuntu 3.18.0-9.10-generic 3.18.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000099041fff] usable
BIOS-e820: [mem 0x0000000099042000-0x00000000994fdfff] reserved
BIOS-e820: [mem 0x00000000994fe000-0x000000009e321fff] usable
BIOS-e820: [mem 0x000000009e322000-0x000000009e380fff] reserved
BIOS-e820: [mem 0x000000009e381000-0x000000009e3a4fff] ACPI data
BIOS-e820: [mem 0x000000009e3a5000-0x000000009ecd4fff] ACPI NVS
BIOS-e820: [mem 0x000000009ecd5000-0x000000009effefff] reserved
BIOS-e820: [mem 0x000000009efff000-0x000000009effffff] usable
BIOS-e820: [mem 0x000000009f800000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Hyrican Informationssysteme AG Intel NUC Serie/NUC5i5RYB, BIOS RYBDWi35.86A.0137.2015.0107.1700 01/07/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FF0000000 write-back
2 base 0090000000 mask 7FF8000000 write-back
3 base 0098000000 mask 7FFC000000 write-back
4 base 009C000000 mask 7FFE000000 write-back
5 base 009E000000 mask 7FFF000000 write-back
6 base 0100000000 mask 7FE0000000 write-back
7 base 011F000000 mask 7FFF000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2304MB, range: 128MB, type WB
reg 3, base: 2432MB, range: 64MB, type WB
reg 4, base: 2496MB, range: 32MB, type WB
reg 5, base: 2528MB, range: 16MB, type WB
reg 6, base: 4GB, range: 512MB, type WB
reg 7, base: 4592MB, range: 16MB, type UC
total RAM covered: 3040M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2544MB, range: 16MB, type UC
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4592MB, range: 16MB, type UC
e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[mem 0x11ee00000-0x11effffff] page 2M
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[mem 0x11c000000-0x11edfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
[mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x99041fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x98ffffff] page 2M
[mem 0x99000000-0x99041fff] page 4k
init_memory_mapping: [mem 0x994fe000-0x9e321fff]
[mem 0x994fe000-0x995fffff] page 4k
[mem 0x99600000-0x9e1fffff] page 2M
[mem 0x9e200000-0x9e321fff] page 4k
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
init_memory_mapping: [mem 0x9efff000-0x9effffff]
[mem 0x9efff000-0x9effffff] page 4k
RAMDISK: [mem 0x3588a000-0x36c3cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0580 000024 (v02 INTEL )
ACPI: XSDT 0x000000009E388090 00009C (v01 HYRSLP HYRSLPTB 00000089 AMI 00010013)
ACPI: FACP 0x000000009E39BDA8 00010C (v05 HYRSLP HYRSLPTB 00000089 AMI 00010013)
ACPI: DSDT 0x000000009E3881B8 013BEA (v02 HYRSLP HYRSLPTB 00000089 INTL 20120913)
ACPI: FACS 0x000000009ECD3F80 000040
ACPI: APIC 0x000000009E39BEB8 000084 (v03 HYRSLP HYRSLPTB 00000089 AMI 00010013)
ACPI: FPDT 0x000000009E39BF40 000044 (v01 HYRSLP HYRSLPTB 00000089 AMI 00010013)
ACPI: FIDT 0x000000009E39BF88 00009C (v01 HYRSLP HYRSLPTB 00000089 AMI 00010013)
ACPI: MCFG 0x000000009E39C028 00003C (v01 HYRSLP HYRSLPTB 00000089 MSFT 00000097)
ACPI: HPET 0x000000009E39C068 000038 (v01 HYRSLP HYRSLPTB 00000089 AMI. 00000005)
ACPI: SSDT 0x000000009E39C0A0 000315 (v01 HYRSLP HYRSLPTB 00000089 INTL 20120913)
ACPI: UEFI 0x000000009E39C3B8 000042 (v01 HYRSLP HYRSLPTB 00000089 00000000)
ACPI: SSDT 0x000000009E39C400 000C7D (v02 HYRSLP HYRSLPTB 00000089 INTL 20120913)
ACPI: ASF! 0x000000009E39D080 0000A0 (v32 HYRSLP HYRSLPTB 00000089 TFSM 000F4240)
ACPI: SSDT 0x000000009E39D120 0004D6 (v02 HYRSLP HYRSLPTB 00000089 INTL 20120913)
ACPI: SSDT 0x000000009E39D5F8 000B74 (v02 HYRSLP HYRSLPTB 00000089 INTL 20120913)
ACPI: SSDT 0x000000009E39E170 005BEF (v02 HYRSLP HYRSLPTB 00000089 INTL 20120913)
ACPI: DMAR 0x000000009E3A3D60 0000D4 (v01 HYRSLP HYRSLPTB 00000089 INTL 00000001)
ACPI: SLIC 0x000000009E3A3E38 000176 (v01 HYRSLP HYRSLPTB 00000089 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
NODE_DATA(0) allocated [mem 0x11eff8000-0x11effcfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x99041fff]
node 0: [mem 0x994fe000-0x9e321fff]
node 0: [mem 0x9efff000-0x9effffff]
node 0: [mem 0x100000000-0x11effffff]
Initmem setup node 0 [mem 0x00001000-0x11effffff]
On node 0 totalpages: 773635
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10042 pages used for memmap
DMA32 zone: 642663 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xa0000000-0xdfffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x99042000-0x994fdfff]
PM: Registered nosave memory: [mem 0x9e322000-0x9e380fff]
PM: Registered nosave memory: [mem 0x9e381000-0x9e3a4fff]
PM: Registered nosave memory: [mem 0x9e3a5000-0x9ecd4fff]
PM: Registered nosave memory: [mem 0x9ecd5000-0x9effefff]
PM: Registered nosave memory: [mem 0x9f000000-0x9f7fffff]
PM: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88011ec00000 s83904 r8192 d30784 u524288
pcpu-alloc: s83904 r8192 d30784 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 761524
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2942020K/3094540K available (7913K kernel code, 1220K rwdata, 3692K rodata, 1392K init, 1324K bss, 152520K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:728 0
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.171 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.34 BogoMIPS (lpj=6384684)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e8f000 - ffffffff81e97000)
ftrace: allocating 29672 entries in 116 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x0000009eefc000 end: 0x0000009ef0afff
dmar: RMRR base: 0x0000009f800000 end: 0x000000dfffffff
dmar: ANDD device: 2 name: \_SB.PCI0.SDHC
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz (fam: 06, model: 3d, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (12769.36 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9e3a5000-0x9ecd4fff] (9633792 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 13:36:57, date: 02/11/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 18 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880119520C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011945A800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011951E800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1626] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7134000-0xf7137fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf713d000-0xf713d01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf713b000-0xf713bfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf713a000-0xf713a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7139000-0xf71397ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7138000-0xf71380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x99042000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9e322000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:04: [mem 0xf7ff0000-0xf7ffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20172K (ffff88003588a000 - ffff880036c3d000)
dmar: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9a322000-0x9e322000] (64MB) mapped at [ffff88009a322000-ffff88009e321fff]
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x19
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x19
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x19
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1423661817.516:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 5785
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
platform serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.0-9-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.0-9-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf713a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.0-9-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 460474ba975d9466f2fa856964e6ff52f3717aae'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:759:634
rtc_cmos 00:02: setting system clock to 2015-02-11 13:36:57 UTC (1423661817)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1392K (ffffffff81d33000 - ffffffff81e8f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 268K (ffff8800017bd000 - ffff880001800000)
Freeing unused kernel memory: 404K (ffff880001b9b000 - ffff880001c00000)
random: systemd-udevd urandom read with 7 bits of entropy available
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7139000 port 0xf7139100 irq 43
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:70:94:ad
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-3: new low-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON SV300S37A120G, 600ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=8087, idProduct=8001
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-3: New USB device found, idVendor=04f2, idProduct=0116
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB Keyboard
usb 1-3: Manufacturer: CHICONY
usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: new low-speed USB device number 3 using xhci_hcd
Adding 3092476k swap on /dev/sda5. Priority:-1 extents:1 across:3092476k SSFS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
usb 1-4: New USB device found, idVendor=413c, idProduct=3012
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Dell USB Optical Mouse
usb 1-4: Manufacturer: Dell
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
audit: type=1400 audit(1423661818.268:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=348 comm="apparmor_parser"
audit: type=1400 audit(1423661818.268:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=348 comm="apparmor_parser"
audit: type=1400 audit(1423661818.268:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=348 comm="apparmor_parser"
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (361) killed by HUP signal
init: cups main process ended, respawning
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 1-7: new full-speed USB device number 4 using xhci_hcd
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
audit: type=1400 audit(1423661818.396:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=412 comm="apparmor_parser"
audit: type=1400 audit(1423661818.396:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=412 comm="apparmor_parser"
audit: type=1400 audit(1423661818.396:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=412 comm="apparmor_parser"
audit: type=1400 audit(1423661818.396:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=412 comm="apparmor_parser"
[drm] Memory usable by graphics device = 4096M
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
hidraw: raw HID events driver (C) Jiri Kosina
i915 0000:00:02.0: irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
tsc: Refined TSC clocksource calibration: 1596.304 MHz
usb 1-7: No LPM exit latency info found, disabling LPM.
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:03.0: irq 47 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0116.0001/input/input7
hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-3/input0
input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:413C:3012.0002/input/input8
hid-generic 0003:413C:3012.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:14.0-4/input0
usbcore: registered new interface driver btusb
sound hdaudioC1D0: autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x19
Bluetooth: hci0: read Intel version: 370810011003110e04
Bluetooth: hci0: Intel device is already patched. patch num: 04
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
cfg80211: Calling CRDA to update world regulatory domain
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X
iwlwifi 0000:02:00.0: Unsupported splx structure
iwlwifi 0000:02:00.0: loaded firmware version 23.11.10.0 op_mode iwlmvm
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
init: failsafe main process (503) killed by TERM signal
audit: type=1400 audit(1423661819.352:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1423661819.352:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=668 comm="apparmor_parser"
Switched to clocksource tsc
systemd-logind[673]: New seat seat0.
systemd-logind[673]: Watching system buttons on /dev/input/event2 (Power Button)
systemd-logind[673]: Watching system buttons on /dev/input/event3 (Video Bus)
systemd-logind[673]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[673]: Watching system buttons on /dev/input/event0 (Sleep Button)
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
random: nonblocking pool is initialized
init: alsa-restore main process (936) terminated with status 99
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1207) terminated with status 1
systemd-logind[673]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[673]: New session c1 of user evisco.
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 57 callbacks suppressed
audit: type=1400 audit(1423661848.409:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2019 comm="apparmor_parser"
audit: type=1400 audit(1423661848.409:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2019 comm="apparmor_parser"
audit: type=1400 audit(1423661848.421:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2019 comm="apparmor_parser"
init: wait-for-state (whoopsienetwork-manager) main process (967) terminated with status 100
init: whoopsie main process (2024) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2028) terminated with status 100
init: whoopsie main process (2066) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2070) terminated with status 100
init: whoopsie main process (2141) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2145) terminated with status 100
init: whoopsie main process (2171) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2175) terminated with status 100
init: whoopsie main process (2193) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2197) terminated with status 100
init: whoopsie main process (2232) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2236) terminated with status 100
init: whoopsie main process (2771) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2775) terminated with status 100
init: whoopsie main process (2846) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2850) terminated with status 100
init: whoopsie main process (2902) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2906) terminated with status 100
init: whoopsie main process (2950) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2954) terminated with status 100
init: whoopsie main process (2980) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (2984) terminated with status 100
init: whoopsie main process (2996) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (3000) terminated with status 100
init: whoopsie main process (3012) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (3016) terminated with status 100
init: whoopsie main process (3027) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (3031) terminated with status 100
init: whoopsie main process (3051) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (3055) terminated with status 100
init: whoopsie main process (3087) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (3091) terminated with status 100
init: whoopsie main process (3100) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (3104) terminated with status 100
init: whoopsie main process (3170) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (3174) terminated with status 100
init: whoopsie main process (4628) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4632) terminated with status 100
init: whoopsie main process (4644) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4648) terminated with status 100
init: whoopsie main process (4660) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4664) terminated with status 100
init: whoopsie main process (4670) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4674) terminated with status 100
init: whoopsie main process (4680) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4684) terminated with status 100
init: whoopsie main process (4690) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4694) terminated with status 100
init: whoopsie main process (4702) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4706) terminated with status 100
init: whoopsie main process (4712) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4716) terminated with status 100
init: whoopsie main process (4722) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4726) terminated with status 100
init: whoopsie main process (4732) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4736) terminated with status 100
init: whoopsie main process (4742) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4746) terminated with status 100
init: whoopsie main process (4752) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4756) terminated with status 100
init: whoopsie main process (4762) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4766) terminated with status 100
init: whoopsie main process (4775) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4779) terminated with status 100
init: whoopsie main process (4785) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4789) terminated with status 100
init: whoopsie main process (4795) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4799) terminated with status 100
init: whoopsie main process (4806) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4810) terminated with status 100
init: whoopsie main process (4816) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4820) terminated with status 100
init: whoopsie main process (4826) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4830) terminated with status 100
init: whoopsie main process (4836) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4840) terminated with status 100
init: whoopsie main process (4853) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4857) terminated with status 100
init: whoopsie main process (4863) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4867) terminated with status 100
init: whoopsie main process (4879) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4883) terminated with status 100
init: whoopsie main process (4889) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4893) terminated with status 100
init: whoopsie main process (4899) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4903) terminated with status 100
init: whoopsie main process (4909) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4913) terminated with status 100
init: whoopsie main process (4919) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4923) terminated with status 100
init: whoopsie main process (4966) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4970) terminated with status 100
init: whoopsie main process (4984) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4988) terminated with status 100
init: whoopsie main process (4994) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (4998) terminated with status 100
init: whoopsie main process (5004) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5008) terminated with status 100
init: whoopsie main process (5019) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5023) terminated with status 100
init: whoopsie main process (5031) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5035) terminated with status 100
init: whoopsie main process (5041) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5045) terminated with status 100
init: whoopsie main process (5051) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5055) terminated with status 100
init: whoopsie main process (5095) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5099) terminated with status 100
init: whoopsie main process (5105) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5109) terminated with status 100
init: whoopsie main process (5115) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5119) terminated with status 100
init: whoopsie main process (5126) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5130) terminated with status 100
init: whoopsie main process (5136) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5140) terminated with status 100
init: whoopsie main process (5147) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5151) terminated with status 100
init: whoopsie main process (5171) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5175) terminated with status 100
init: whoopsie main process (5202) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5206) terminated with status 100
init: whoopsie main process (5212) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5216) terminated with status 100
init: whoopsie main process (5222) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5226) terminated with status 100
init: whoopsie main process (5304) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5308) terminated with status 100
init: whoopsie main process (5329) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5333) terminated with status 100
init: whoopsie main process (5343) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5347) terminated with status 100
init: whoopsie main process (5585) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5589) terminated with status 100
init: whoopsie main process (5600) terminated with status 1
init: whoopsie main process ended, respawning
init: wait-for-state (whoopsienetwork-manager) main process (5604) terminated with status 100
init: whoopsie main process (5629) terminated with status 1
init: whoopsie main process ended, respawning
init: D-Bus blocked objects not being serialised yet
init: upstart-udev-bridge main process (318) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (328) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (521) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: whoopsie main process (6576) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6590) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6594) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6598) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6602) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6606) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6610) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6614) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6618) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6622) terminated with status 1
init: whoopsie main process ended, respawning
init: whoopsie main process (6626) terminated with status 1
init: whoopsie respawning too fast, stopped
init: wait-for-state (whoopsienetwork-manager) main process (5633) terminated with status 100
perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
init: irqbalance main process (939) killed by TERM signal
audit: type=1400 audit(1423663991.468:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=22982 comm="apparmor_parser"
audit: type=1400 audit(1423663991.660:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=23024 comm="apparmor_parser"
audit: type=1400 audit(1423663991.976:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23044 comm="apparmor_parser"
audit: type=1400 audit(1423663991.976:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23044 comm="apparmor_parser"
audit: type=1400 audit(1423663991.988:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=23044 comm="apparmor_parser"
audit: type=1400 audit(1423663992.420:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23093 comm="apparmor_parser"
audit: type=1400 audit(1423663992.420:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23093 comm="apparmor_parser"
audit: type=1400 audit(1423663992.432:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=23093 comm="apparmor_parser"
init: wait-for-state (whoopsienetwork-manager) main process (23837) terminated with status 100
init: whoopsie main process (23844) terminated with status 1
init: whoopsie main process ended, respawning
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.31 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 8413 MB/s
raid6: sse2x2 10101 MB/s
raid6: sse2x4 11910 MB/s
raid6: avx2x1 16194 MB/s
raid6: avx2x2 18377 MB/s
raid6: avx2x4 21159 MB/s
raid6: using algorithm avx2x4 (21159 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 25315.000 MB/sec
Btrfs loaded
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
FAT-fs (sda2): bogus number of reserved sectors
FAT-fs (sda2): Can't find a valid FAT filesystem
XFS (sda2): Invalid superblock magic number
FAT-fs (sda2): bogus number of reserved sectors
FAT-fs (sda2): Can't find a valid FAT filesystem
MINIX-fs: unable to read superblock
attempt to access beyond end of device
sda2: rw=16, want=3, limit=2
hfsplus: unable to find HFS+ superblock
qnx4: no qnx4 filesystem (no root dir).
ufs: You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING